Eco oil filter production line
-
Filter paper slitting machine（JR-FQJ-1）
sliting filter paper,filter cloth etc. filter materials
-
Car ECO filter folding machine（JR-JYZZ-3）
The machine mainly folding machine oil paper folding products beautiful appearance, convenient adjustment, with edge glue function (with broken glue function)
- The maximum power of the entire machine is approximately: 2KW+5.5KW+5KW
- The average working power is approximately: 4KW
- The maximum area occupied by the equipment: 7.5 meters long (2 meters for transmission belt), 2 meters wide and 1.5 meters high
- equipment: 900kg
- The working width: 400mm
- The folding height: 12-30mm
-
Automatic rotary type hot melt adhesive machine（JR-RZ-250-8）
Suitable for folding filter paper both ends of the joint hot melt glue welding
- Production capacity: 15PCS/min
- Filter height: ≦250mm
- Hot melt machine capacity: 10KGS
- Heating power: 6KW
- Air pressure: 0.6Mpa
- Power supply: 380V/50HZ
- Equipment weight: 500KGS
- Dimensions: 1400*1100*1600mm
-
Car oil filter end cap assembly machine（JR-RBH-4）
Injection molding of upper and lower end covers of automobile oil filter elements, one-time forming machinery.
- Max working diameter: 120mm
- Max working height: 320mm
- Four-station equipment: 2 people operation production
- Output: 400pcs/h
- Total power: 5KW
- Equipment weight: 500KGS
- Dimensions: 1700*1100*1700mm
-
End Cover Glue Injection Machine
This glue injection machine can be equipped with a variety of flowable glue ratios such as 1:5, 1:8, 1:6, etc. It has a servo motor, is precise and efficient, stable and durable, and is widely used in the field of filter element glue ratio.
- Glue output: 5-40g
- End cover diameter range: 70-420mm
- Production efficiency: 8pcs/min-20pcs/min (depending on the product)
- Total power: 5KW
- Air pressure: 0.6Mpa
- Power supply: 380V/50HZ
- Equipment weight: 350KGS
- Dimensions: 1100mm*1100mm*1700mm
-
Filter Paper Curing Oven
Translation: Mainly used for the heating and curing of the upper and lower covers of engine diesel, accelerating the bonding speed, thereby improving production efficiency.
1. The total length of the baking channel is 13 meters, the length of the baking channel is 10 meters, the length of the front conveyor line is 980mm, and the length of the rear conveyor line is 1980mm. 2. The conveyor belt is 800mm wide and the belt plane is 730±20mm above the ground. Frequency conversion speed regulation 0.5-1.5m/min, calculated at a height of 160mm. 3. Far infrared heating tube is used for heating, with a heating power of about 48KW and a total power of about 52KW. The preheating time in winter room temperature is no more than 40 minutes, and the temperature can be adjusted to 220°C. 4. There is a smoke exhaust device at the entrance and exit of the oven, with a power of 1.1KW*2. 5. The width of the mesh belt is 800mm and the effective width is 750mm. 6. The circulating fan and heater are interlocked for protection, and an over-temperature alarm is configured.
-
PVC rubber ring assembly machine（JR-PVC-4）
Used for welding automobile diesel PVC upper and lower end covers.
- Working diameter range: 40-120mm
- Working height range: 40-300mm
- Seven-station equipment: 1 person operation production
- Output: 150pcs/h
- Total power: 7KW
- Equipment weight: 300KGS
- Dimensions: 1450*600*1600mm